- Open Access
Typing methods based on whole genome sequencing data
One Health Outlook volume 2, Article number: 3 (2020)
Whole genome sequencing (WGS) of foodborne pathogens has become an effective method for investigating the information contained in the genome sequence of bacterial pathogens. In addition, its highly discriminative power enables the comparison of genetic relatedness between bacteria even on a sub-species level. For this reason, WGS is being implemented worldwide and across sectors (human, veterinary, food, and environment) for the investigation of disease outbreaks, source attribution, and improved risk characterization models. In order to extract relevant information from the large quantity and complex data produced by WGS, a host of bioinformatics tools has been developed, allowing users to analyze and interpret sequencing data, starting from simple gene-searches to complex phylogenetic studies. Depending on the research question, the complexity of the dataset and their bioinformatics skill set, users can choose between a great variety of tools for the analysis of WGS data. In this review, we describe the relevant approaches for phylogenomic studies for outbreak studies and give an overview of selected tools for the characterization of foodborne pathogens based on WGS data. Despite the efforts of the last years, harmonization and standardization of typing tools are still urgently needed to allow for an easy comparison of data between laboratories, moving towards a one health worldwide surveillance system for foodborne pathogens.
Historical perspective on typing methods for foodborne pathogens
Following the establishment of the germ theory of disease, postulated by Louis Pasteur in the late 1850s, and extended by Robert Koch in the 1880s, major advances in isolation and cultivation techniques of bacterial organism were made, making it possible for microbiologists to clearly differentiate bacteria from each other, even within a species, thus pushing the development of prokaryote taxonomy . Initially, physiological, biochemical and other phenotypic properties served as markers for species identification. In the 1930s, serotyping was one of the first approaches to differentiate bacteria based on antigen-antibody reactions on a species and subspecies level. Later, in the 1950s, phage typing schemes e.g. for Staphylococcus spp., were developed to be even more discriminative . From the beginning, these schemes were used to trace the source of infections.
The discovery of nucleic acids, the postulation that genetic information is embedded in the DNA, and the description of the structure of the DNA molecule by Watson and Crick in the middle of the 1950s, formed the foundation of the new field of Molecular Biology . At the beginning of the 1980s, Tenover and colleagues  developed the first bacterial strain typing method based on nucleic acids as marker molecules. It followed the discovery that the number and sizes of plasmids within different bacterial strains vary considerably, and that therefore it is possible to use plasmids naturally occurring in many genomes, to distinguish strains in an outbreak investigation. Although the first DNA sequencing method (which made it possible to determine the exact base pair sequence of a DNA fragment) was developed by Maxam-Gilbert and Sanger as early as 1977, it did not initially find broad application in microbial typing. Instead, pulsed-field gel electrophoresis, developed in the late 1980s, became the universal and widely used gold standard method for bacterial strain typing for the following two decades . During pulsed-field gel electrophoresis, genomic DNA is fragmented with rare-cutting enzymes and the resulting size and number of DNA fragments form a stable and reproducible restriction pattern, which can be compared between different strains. DNA sequencing remained a specialized and expensive method until the late 1980s, when the polymerase chain reaction was developed by Kary Mullis and Michael Smith . Using this method, a specific piece of DNA can be exponentially amplified, before it is separated by size in an electric field and visualized by intercalating dyes. The polymerase chain reaction transformed the sequencing process, significantly improving the applicability of Sanger-sequencing in diagnostics. Since then, many sequence-based typing approaches for the detection and typing of foodborne pathogens have been developed. One of the most successful sequence-based typing approaches is the concept of multilocus sequence typing (MLST), initially proposed for the pathogen Neisseria meningitidis in 1998 [7, 8]. Since then numerous MLST schemes were developed and are currently applied for hundreds of pathogens (http://pubmlst.org). In general, MLST typing involves the amplification of seven loci of housekeeping gene by PCR, followed by DNA sequencing of the resulting PCR fragments. Specific DNA sequences are then matched to allelic profiles. A single nucleotide variation at any of these loci defines a different allele and informs the sequence type (ST). MLST detects changes at DNA level that cannot be inferred from the phenotype, such as serotyping or multilocus enzyme electrophoresis (MLEE). Multilocus sequencing generates comparably small data files, which contain non-ambiguous information and which can be easily shared with other laboratories. Generally, the discriminatory power of MLST is comparable or slightly better than traditional serotyping . Nevertheless, 7-gene MLST is often not discriminative enough to be useful for outbreak detection. Because of this, the PCR-based typing method multilocus variable-number tandem-repeat analysis (MLVA) was developed to discriminate between highly related strains . This approach is based on the detection of repetitive tandem DNA units within various loci. Repeating units occur of approximately 1–100 base pairs in length. The number of tandem repeats can change by slipped strand mispairing mechanism with each generation, making it possible to infer relatedness of bacteria from the variation in the tandem repeat units. Because MLVA has been proven in outbreak studies as a fast tracing tool with increased resolution compared to pulsed field gel electrophoresis (PFGE), the method has been standardized for certain pathogenic subtypes [11, 12].
The advance of WGS has provided new opportunities to investigate the evolution of foodborne pathogens even over short time periods [13, 14]. WGS provides unprecedented resolution in discriminating highly related strains. Although PFGE and MLVA were milestones in bacterial strain typing, they were not informative enough for certain types of analysis, such as evolutionary studies and spatiotemporal investigations. In contrast, WGS offers ultimate resolution for surveillance and outbreak investigations, source attribution, genomic studies, as well as genomic information for the prediction of phenotypes (serotyping, antimicrobial resistance, biofilm formation, pathogenicity and virulence). Many approaches and bioinformatics tools have been developed to analyse and extract the relevant genomic data. Here, we summarize the most important and recent concepts for typing foodborne pathogens.
Phylogenomic analyses of foodborne pathogens
One of the great benefits of WGS lies in comparative genomics, which allows the inference of the phylogenetic relationship between a set of bacterial strains. This provides valuable information for the tracking of the outbreak source and for the identification of clonal strains.
In a first step, the similarity between different genomes is estimated by different approaches further described in Table 1. Subsequently this is followed by a clustering step to infer phylogenetic relationships and clusters. Two methods, gene-by-gene (also known as multi-locus sequence typing) and Single-Nucleotide Polymorphism (SNP)-based approaches are commonly distinguished. Both approaches have in common that a distance matrix between a set of strains can be derived (see below for details), which allows the construction of a phylogenetic tree via various clustering techniques (e.g. neighbor-joining trees, minimum-spanning trees, hierarchical clustering). Either approaches can be used to define cluster types and cluster addresses: all samples within a specified distance threshold belong to the same cluster type. A cluster address e.g. SNP address , or Hierarchical Clustering of core genome MLST (cgMLST) sequence types (HierCC)  is the combination of cluster types with a set of different distance thresholds. It provides a quick interpretation of the degree of similarity of a set of samples related to an outbreak, super-lineage or eBurst group.
To analyse the genetic similarity between genomes in a species the initial 7-gene multi-locus sequence typing approach has been upscaled to hundreds or thousands of gene loci [8, 17]. Core genome MLST (cgMLST) is a gene-by-gene approach which compares genomes using a large number of gene loci. In practice, genome assembly data is aligned to a scheme – a set of loci and a collection of associated allele sequences. The allele calling step yields either the allele number of an allele sequence already present in a scheme or assigns a new allele number. As a result of cgMLST allele calling, each isolate is characterized by its allele profile, i.e. the set of allele numbers for each locus. The sum of differently assigned allele numbers between a pair of samples determines the allele difference (either accounting for missing loci or the absolute difference) and the cross-comparison of a set of samples yields the allele distance matrix.
Finally, cgMLST analyses can be turned into a phylogeny via different strategies, e.g. single-linkage hierarchical clustering, neighbor-joining (NJ) or minimum spanning (MS) trees . The choice of method depends on the ancestral divergence (high divergence is better reflected in NJ trees), computational considerations (MS trees is less demanding) and presence of missing data.
Central to the cgMLST approach is the definition of a cgMLST scheme . A given scheme consists of a defined set of loci and a collection of alleles for each locus which are typically numbered (allele numbers). A scheme is created by collecting a large number of genomes of a species and identifying the set of loci present in the majority (frequently > 95%) of the genomes of a taxonomic grouping [19, 20]. Schemes exist for various species (Table 2). In some cases (e.g. Listeria monocytogenes) various schemes exist for the same species. Although they may lead to similar conclusions , and are likely to yield phylogenetic trees with overall similar topology, cgMLST sequence types derived from different schemes are not directly comparable as they may contain different loci, loci names, or other loci orders, etc. Even schemes with the exact same locus definitions, but hosted on different services (e.g. Enterobase and Ridom SeqShere+, compare Fig. 1) are not comparable since the allocation of novel allele numbers are not synchronized and the same allele number relates to different allele sequences.
cgMLST vs wgMLST
In principle, wgMLST can provide a higher resolution for closely linked clusters as the distance matrix is computed on a larger set of loci. Nevertheless a number of studies demonstrate that results derived from wgMLST and cgMLST approaches are often quite similar. For example, Pearce et al.  were able to demonstrate that there was no statistically significant difference in the discriminatory ability of cgMLST and wgMLST within a S. enterica serovar Enteritidis outbreak. This was further confirmed in a study analysing 145 S. enterica serovar Heidelberg strains involved in four distinct outbreak events . Another study analyzing a diverse set of ~ 200 Listeria monocytogenes strain found that when comparing phylogenetic trees derived from wgMLST and cgMLST their topology were highly similar . For the practical application, one can envision a first cgMLST analysis on a diverse dataset of a species followed by wgMLST for closely related (according to the cgMLST results) strains.
Since cgMLST is a stable typing method for bacteria within a species with many publically available schemes it facilitates global foodborne outbreak investigation [19, 20]. However, to date no worldwide agreed centrally organized allele nomenclature system exists. Assignment of allele numbers to novel alleles is currently done on local or systems with centrally curated nomenclature such as the Enterobase service and others (see section below). Although schemes can be shared, the sharing of analyses between different sites is impeded by the possibility to efficiently synchronize novel alleles. Furthermore, cgMLST results depend on the detailed trimming, assembly and alignment strategy. In our experience, different approaches can cause several allele differences (unpublished data).
SNP calling and choice of reference
Another approach is the identification of single nucleotide polymorphisms (SNPs) that vary among strains. SNPs are detected by mapping sequence reads against a closely related reference genome and recording nucleotide differences . For a set of strains, only reference positions that are covered by all query genomes are considered, which form a set of core SNPs. All possible combinations of pairwise SNP distances determine the SNP distance matrix which allows fast and simple phylogenetic analysis such as neighbor-joining trees. Moreover, the aligned core SNPs form the basis for a more detailed evolutionary analysis – typically maximum likelihood phylogenetic trees . SNP-based analyses have been successfully applied in resolving large national and international outbreaks [27, 29, 30]. The choice of a reference is crucial for reliable SNP analyses . Firstly, a high-quality, closed reference genome permits calling SNP positions with higher accuracy than a non-curated draft genome containing many contigs. Secondly, the reference is ideally closely related to the set of strains under investigation. If it is too distant, less reference positions will be covered and subsequently less SNPs discovered. Likewise if the set of query genomes contains one or more remotely linked isolates, the set of core SNPs will be reduced. Strategies for obtaining a good reference consist in choosing a genome from the same serogroup, 7-gene MLST or MLST clonal complex . Other approaches estimate the average distance of the query genomes to a large set of potential reference genomes (https://gitlab.com/s.fuchs/refRank). Apart from the choice of reference, a number of algorithms and parameters need to be defined for calling, quality assuring and filtering SNPs [27, 32]. This can potentially hinder standardization within and between laboratories [33, 34].
There is a variety of tools available for SNP calling, such as SAMtools , GATK  and Freebayes . Furthermore there are specialized pipelines for SNP calling from bacterial genomes, for example Snippy (https://github.com/tseemann/snippy), CFSAN SNP Pipeline , NASP  and BactSNP . Other solutions are targeted to routine sequencing and SNP calling such as SnapperDB , which is essentially a database that stores variant call files from each isolate. This has the advantage that new strains can be compared to the database and a pairwise distance matrix can be updated quickly, which allows easy clustering and searching.
Comparison of SNP and cgMLST
It has been shown that SNP and cgMLST (and wgMLST) analyses are congruent and both approaches are well suited and commonly applied for food outbreak analyses . The cgMLST approach has the advantage that it uses a consistent set of conserved loci and allele definitions for an entire taxonomic group such as a species. Conversely, an allele difference between two strains may be explained by one or several mutations, thus indicating the intrinsically higher discriminatory power of SNP analyses. In particular, SNP results allow the application of detailed evolutionary models for true phylogenetic inference, based on the core SNP alignment. In practice, SNP analyses may be applied after defining a potential phylogenetic cluster after pre-clustering with e.g. cgMLST.
K-mer based approaches
Apart from the commonly applied approaches discussed here, a number of novel approaches attempt to overcome the need of an a priori reference and scheme definition. K-mer based tools split WGS data into nucleotide blocks of a defined length k. The pair-wise comparison of the k-mer content between a set of genomes are useful to evaluate their phylogenetic relatedness. K-mer approaches are often applied in order to investigate the taxonomy of microorganisms  but are also used for sub-clustering, e.g. serovar prediction, antimicrobial resistance typing or mobile genetic elements identification (see sections below).
An interesting open-source tool is kSNP3 , which can detect SNPs between strains without the need of a reference genome. To do so it uses a k-mer based approach that can detect core SNPs between a set of strains and which can return parsimony, neighbor-joining and maximum-likelihood trees. kSNP3 was successfully applied for a retro-perspective outbreak detection [42, 43]. Another k-mer based approach, PopPUNK (Population Partitioning Using Nucleotide K-mers), exploits the estimated overlap of core and accessory genome between a pair of sequences using the MinHash algorithm [44, 45]. Based on this set of distance pairs, clusters are created using model fitting, either using a two-dimensional Gaussian mixture model or density-based hierarchical clustering (HDBSCAN). PopPUNK was shown to be able to successfully resolve diverse bacterial populations into strains (and detect similar clonal complexes as cgMLST). Another advantage of PopPUNK is that new genomes can easily be associated to existing clusters without the need to refit the model or recalculate all pairwise distances. Another novel tool for the analysis of highly similar sequences, such as those encountered in outbreak investigations is Split Kmer Analysis (SKA) . This method detects split k-mers (pairs of k-mers which are separated by a single base) and employs those as markers for variation between closely-related genomes sequences. SKA has the advantage of being very rapid and memory-efficient and preliminary results show its use in identifying clusters in a retrospective epidemiology study .
Given a core alignment resulting from a SNP analysis, a number of tools exist for subsequent phylogenetic analysis. Some fast and simple tools, such as fasttree, are able to estimate approximate maximum likelihood trees, however these may have limited accuracy . A maximum likelihood based tool providing a large number of evolutionary models and bootstrap settings is RAxML (Randomized Axelerated Maximum Likelihood) . Similarly, IQ-TREE is a fast and effective stochastic algorithm to infer phylogenetic trees by maximum likelihood . The Bayesian method MrBayes infers phylogeny using a Markov chain Monte Carlo method . BEAST is a similar program based on Bayesian analysis with a focus on time-scaled trees . Although the Bayesian inference of phylogenies is computational expensive, it provides a large number of options and yields very accurate phylogenies. A recent evaluation shows that RaxML, as well as IQ-TREE, produce reasonably accurate trees in acceptable computational time . Another tool, Gubbins, allows the phylogenetic inference of recombinant bacterial species (such as Campylobacter spp.), while mitigating the effect of horizontal sequence transfer on phylogenetic reconstructions . To do so, it identifies regions containing elevated densities of base substitutions and constructs the phylogeny from the sequence outside of these regions.
Pathotyping of foodborne pathogens using WGS data
The estimation of the pathogenic potential of a strain is based on the detection of associated virulence factors (VFs). These factors can be differentiated in six categories: i) adherence and colonization factors, ii) Type I to VI secretion systems, iii) immune evasion factors, iv) toxins, v) siderophores for iron absorption and vi) invasion genes . WGS not only allows the detection of known VFs, but also makes it possible to identify new genes or gene variants that confer virulence to bacteria. The relatively high number of hypothetical proteins with unknown function, resulting from microbial genome annotation, implies the presence of further virulence factors within this ‘biological dark matter’. Virulence prediction can be difficult and often needs to be considered contextually, as illustrated by the fact that classical VFs can also sometimes be identified in non-pathogenic strains [56, 57]. The simple detection of the presence or the absence of VFs might therefore not be sufficient due to complex regulative pathways and the impact of mutations in regulators, which can cause an altered virulence as shown for Streptococcus spp.  and for Staphylococcus aureus where more surface proteins are expressed in the virulent strain . Also, the loss of regulation genes, as it is the case for Rickettsia prowazekii that causes epidemic typhus in humans, leads to an increased pathogenicity . Nevertheless, the detection of VFs is a relevant indication for the pathogenicity of most bacteria. Several computational approaches were developed to predict VFs by similarity to known virulence associated patterns. These methods can be differentiated into homology based search, detection of divergent sequence patterns or motifs and machine learning approaches.
One of the major ways to identify virulence genes in WGS data is the search for homologs to genes or proteins already known to be VFs. BLAST [61, 62] is one of the most flexible tools for this task and can be applied on sequencing reads, assembled genomes or protein level. Further, open-source tools running via command-line on nucleotide level include ABRicate (https://github.com/tseemann/abricate) and AMRFinderPlus  that require assembled genomes, Short Read Sequence Typing (SRST2)  for short read sequences as input and ARIBA that produces local assemblies after read mapping to reference genes . The web-based VirulenceFinder (https://cge.cbs.dtu.dk/services/VirulenceFinder/) is an alternative for selected organisms such as Escherichia coli and Staphylococcus spp. with its own curated database that can also be downloaded and used in combination with open-source tools. There are several databases available that collect virulence associated genes as well as associated relevant information. Currently, the Virulence Factor Database (VFDB)  contains 1080 virulence factors of which 575 genes are experimentally verified and 3224 curated virulence factor related genes from 74 bacteria genera. While VFDB is restricted to bacteria, Victors, a manually curated database contains more than 5000 VFs from about 200 pathogens including bacterial, viral parasitic and fungal VFs, which also provides a customized online BLAST against its own database . The Pathosystems Resource Integration Center (PATRIC) contains manually curated VFs and integrates VFs from both the VFDB and Victors for its data annotation and analysis service . One major drawback of the homology approach is that only conserved VFs can be identified, while evolutionary distant virulence genes cannot be detected. Often virulence genes can be found on distinct genetic elements in the bacterial chromosome, known as pathogenicity islands (PAI) [69, 70]. Interestingly, genes on PAI usually differ in their nucleotide composition and codon usage bias from genes on the rest of the chromosome. Together with their association with mobile genetic elements, tRNA genes and an accumulation of CRISPR sequences  and phage related sequences, PAIs are suggested to be acquired by horizontal transfer . A large collection of PAIs and PAI candidates is stored in the Pathogenicity Island Database (PAIDB) . Most bioinformatics tools developed for the prediction of PAIs rely on composition based methods that employ the specific properties of genomic islands, while some compare closely related genomes. It was shown that combining more than one feature of genomic islands for prediction purposes produces more reliable results , for which the application of machine learning methods proved to be useful . A very comprehensive study that compared many GI prediction tools for their user friendliness, methodology, accuracy and precision showed that IslandViewer 4 and GIHunter showed the highest accuracy and precision . Currently only some tools can be applied on draft genomes, which might be overcome by the formation of a reference guided pseudo-chromosome formation that can be obtained by concatenation of sorted contigs . Assembly of PAIs from short reads remains a challenge, for the reason that PAI typically contain repetitive genetic elements such as insertion sequences, which cause the assembly process to generate contig borders at these positions. Additionally these tools might fail, when the sequence composition of the investigated species is similar to the organism from which the genomic islands originated or due to normal variation in sequence composition and occurrence of features typical for PAIs in the genome.
Several machine learning approaches to predict novel VFs have been developed. For example, MP3  uses support vector machines (SVM) and Hidden Markov Model (HMM) to identify virulence protein candidates in metagenomic datasets, even for amino acid fragments typically resulting from the translation of short read sequencing data. The application of a strategy, combining sequence similarity and machine learning, was found to deliver best results for VF prediction , an approach that is applied by VirulentPred . VirulentPred applies a two stage cascade SVM learning approach on protein fasta sequences with a background noise reduction step before the classification that can be employed via a web portal (http://18.104.22.168/virulent/index.html). Differently from the previously described sequence based training, some publicly unavailable approaches rely on classification algorithms utilizing sequence associated information from biological repositories such as gene ontology, functional domains and protein-protein network information [79,80,81]. A recent review concludes that ML-based virulence prediction methods frequently perform worse than BLAST-similarity based approaches . It was shown that the proper definition of an informed, non-random negative dataset is essential and performances commonly fail to generalize in a real-world whole-proteome prediction scenario.
Furthermore other machine learning approaches exist that do not predict VFs as such, but instead predict the pathogenic potential of novel pathogens. Therefore two different concepts exist that have been implemented in different tools: a protein family composition-based [82,83,84] and a read based classification [85,86,87]. The first approach depends on the assembly and annotation of a genome and considers only coding sequences, the latter method can be performed on sequencing reads. One advantage of the latter method is that, even when used with few reads predictions are robust, - a useful feature for incompletely sequenced genomes. In any case, the results generated by machine learning approaches should be carefully analysed, given their high dependency on the training datasets and the fact that pathogenicity is not a sufficiently well understood issue .
Typing of the mobilome using WGS data
The chromosome represents the genetic backbone of a bacterium and comprises the majority of information for the development of the organism-specific properties. In addition, bacterial phenotypes can be strongly influenced by the presence or absence of a diverse set of mobile genetic elements (MGEs), which are usually summarized under the term mobilome [89, 90]. MGEs are pivotal for the bacterial adaptation to prevailing environmental conditions and genomic evolution as they force the exchange of genetic information between different bacteria . Variable regions can constitute notifiable amounts of bacterial genomes and are mainly represented by different types of MGEs, i.e. insertion sequences (IS), bacteriophage/phage genomes (prophages), integrative and conjugative elements (ICEs) as well as plasmids [90, 92]. In the pre-WGS era, the determination of the biology and genetics of MGEs was laborious, time-consuming and often limited by the availability of suitable methods. Nowadays, the availability of short- and long read sequencing techniques for WGS determination allows deeper insights into bacterial genomics and provides detailed information of the content and diversity of MGEs (i.e. plasmids, bacteriophages, transposons) . Generally, DNA sequences associated with MGEs of unrelated bacteria can be easily detected as they often exhibit G + C contents that differ to some extents from that of their hosts, indicating earlier events of lateral gene transfer . As MGEs evolve separately from their microbial hosts, they can exhibit a high diversity that might be strongly influenced by the route of their transmission, host bacteria and/or coexistence with other MGEs [91, 93]. Thus, medium- and large-size MGEs often comprise a complex mosaic-like structure exhibiting components (genes, operons, segments) from other elements that might be ancestrally beneficial for the MGEs or its host bacteria. The WGS-based entries in public databases impressively illustrate the extensive diversity of MGEs, which also hamper easy and reliable typing of them [89, 94, 95].
Plasmids are MGEs of high importance as they can contribute to the plasticity of the bacterial genomes by transmitting insertion sequences and transposons that may interact with other prevailing genetic elements (i.e. chromosome, prophages, and other plasmids) [91, 93]. Additionally, these elements can also provoke homologous or non-homologous recombination with the chromosome leading to an exchange of small or large DNA sequences . Plasmids are linear or circular DNA molecules ranging between 1.5 and > 350 kb (megaplasmids) that sometimes integrate into the bacterial chromosome, but often replicate independently as extrachromosomal elements . As they often carry genes that are beneficial for the survival of the host bacteria (i.e. metabolic- & virulence factors, antibiotic and heavy metal resistances, genes for environmental adaptability and persistence) they are important elements for bacterial adaptation [90, 91, 97]. Beside such factors, plasmids can also exhibit genes that are essential for their spread . Traditionally, they were attributed to three different types based on their transmissibility: i) self-transmissible plasmids, also designated as conjugative plasmids, comprise all necessary genetic information to develop a mating pair formation (MPF) complex and DNA transfer replication apparatus, which are required for conjugative transfer; ii) mobilizable plasmids are not self-transmissible and use a MPF complex of another genetic element, while iii), the third type is represented by plasmids that are neither conjugative nor mobilizable [98, 99]. Due to their particular role in exchanging genetic material (horizontal gene transfer), great efforts have been made to develop reliable typing techniques for plasmids. Historically, plasmid-typing was mainly based on incompatibility (Inc) studies of plasmids with other plasmids in the same cell, subsequent restriction profiling and/or DNA-DNA hybridization. The large diversity of plasmid genomes required the development of a reliable and rapid typing system based on DNA-DNA hybridization or PCR amplification of specific replicon DNA units that are essential for autonomously replication (Rep) within a host. The previously described Inc- and Rep-typing procedures both rely on replication factors and provide further insights into the potential impact of the plasmid (i.e. associated with virulence and/or antimicrobial resistance determinants) .
There are only some tools for in silico typing of plasmids from WGS data currently available. The manuscript of Orlek and colleagues (2017) provides a comprehensive overview of available tools and strategies for plasmid identification  of which only some are addressed below. One of the most popular tools, PlasmidFinder , enables the detection of plasmid replicons and assigns the requested plasmids to the respective Inc. group of the previously used Inc./Rep-typing schemes . PlasmidFinder further provides information on the similarity values of the requested sequence to a closely related reference. Users that are interested in a more thorough typing of plasmids can further use the pMLST tool that provides plasmid MLST allele sequence and profile data from public databases for molecular typing (https://pubmlst.org). PlasmidFinder is well established for in silico analysis of plasmids from Enterobacteriaceae and some Gram-positive bacteria, but lacks information on plasmids from a broad range of other bacteria . PLACNETw, another tool for plasmid reconstruction from WGS data, uses information about scaffold links and coverage of the WGS assembly, nucleotide comparison to reference plasmids, and plasmid features (i.e. replication initiator proteins) for in silico prediction. This tool also provides additional features for plasmid visualization and further downstream analysis . Plasmid Profiler is a pipeline that performs comparative plasmid content analysis and provides a heatmap of the plasmid content in WGS data. For plasmid prediction, the pipeline initially identifies plasmids of the reference database that are represented in the reads using the K-mer Analysis Toolkit (KAT) and develops individual isolate plasmid databases. Subsequent analysis is conducted using SRST2 to identify plasmid matches from the individual isolate plasmid databases. Finally, the BLAST suite is used to identify the incompatibility group and specific genes of interest on the plasmid sequences. Thereafter the identified matches are scored on a combined measure of maximized coverage and minimized sequence divergence. The program provides a static and an interactive heatmap as well as a tabular summary of the results. Beside WGS data the user further needs a reference plasmid database and replicon/gene of interest database for comparative analysis . PlasFlow is a scripts-based plasmid sequence prediction tool for metagenomic data that relies on neural network models. The models were trained on full genome and plasmid sequences and are thus able to differentiate between chromosomes and plasmids. Beside this information, the tool also provides thresholds that allow for an assessment of the prediction quality .
There are also some tool independent options for the prediction of plasmid-based sequence contigs in WGS data . The first prediction option is based on the copy number of the plasmids. Usually, small- and medium-size plasmids provide a higher copy number per bacteria than the chromosome . Thus sequence contigs that are based on small or medium-sized plasmid usually yield higher sequence coverages than chromosomal contigs. Given that large plasmids often exhibit similar copy numbers as the chromosome this option might be only suitable for reliable prediction of small and medium-sized plasmids. The second option for plasmid prediction is based on the predominantly circular structure of plasmid molecules. Thus, DNA contigs exhibiting terminal redundant sequences might represent plasmid contigs. However, a lot of DNA molecules, especially transposons and insertion sequences also provide DNA fragments with terminal repeats leading to false-positive plasmid predictions without further analysis.
The content and composition of prophages in bacteria is of particular importance for genome diversification, as the repertoire of bacteriophage (phage) sequences can represent a notifiable amount of the variable gene content among different bacterial isolates. The great majority of the frequently sequenced bacteria are lysogens and therefore represent a huge source of prophages [105, 106]. Prophages are genomes of temperate phages that have infected a susceptible host bacterium, were they either integrate into the chromosome or exist as circular or linear plasmids. During the lysogenic lifestyle, prophages coexist with their hosts in a latent form without producing virus particles. Specific cellular stress signals (i.e. temperature, antibiotics, UV radiation) can activate the lytic lifestyle, in which virus propagation is initiated and cellular lysis occurs. As the genomes of temperate phages usually exhibit additional non-essential genetic information, prophages often provide genes that potentially encode beneficial components for the host (i.e. gene products involved in a number of bacterial cellular processes, antibiotic resistance, stress response, and virulence) [105, 106]. For most of the temperate phages functional information on their accessory genome is widely unknown, as only some of the identified genes encode products of predictable functions. Furthermore, classification of bacterial viruses is often challenging as bacteriophages belong to the most common and heterogeneous entities of the biosphere. It has been estimated that more bacteriophages (> 1031) appear on the earth than bacteria (> 1029) . In the past, phages were mainly classified on the basis of the morphology of their virion particles as well as their DNA structure. Nowadays, the genetic structure and organization of their genomes are also pivotal for their classification .
For the prediction of prophage sequences within WGS and metagenomics data from bacterial genomes, several tools have been developed. A comprehensive summary on available tools and their properties was recently published by Song et al., 2019 . Most of the currently available programs (i.e. Prophage Hunter, MARVEL, PHAST or PHASTER, MetaPhinder, VirSorter, PhiSpy) use similarity matching with entries of the phage/prophage/virus databases and are based on specific phage genome features (i.e. components for lysis, integration, replication, lifestyle regulation, DNA packaging, virion assembly). Some of them, e.g. Prophage Hunter, further use machine learning classifier to assess the status of the prophages. For some of the tools additional functions are available (i.e. annotation of gene products or the prediction of the attachment site), which might be advantageous for the assessment of the predicted prophage sequences. Specifically the prediction whether a prophage might still be active or only represents a remnant DNA artefact (cryptic prophage that was inactivated due to bacterial defense systems or mutational decay) is important in order to assess the impact and its potential for further spreading [105, 106]. Overall, many of the tools provide a good performance in detecting prophage sequences in bacterial WGS or metagenomics (i.e. MARVEL) datasets and can often be used by researchers without programming skills (i.e. Prophage Hunter, PHAST/PHASTER, VirSorter). However, in silico assessment of prophages might still be challenging, especially if bacterial WGS data of underrepresented organisms is analysed and the used phage/prophage/virus databases lack data on their bacterial viruses . Due to the huge number of prophages and their high diversity further efforts are needed for reliable prophage prediction and activity assessment as the identification of active prophages is crucial for studying co-evolution of phage and bacteria [105, 106].
Transposable elements are integral parts of bacteria and consist of insertion sequences and transposons. While insertion sequences are simply structured, short DNA elements (< 5 kb with usually 1–2 coding sequences) only comprising genes that facilitate their transmission, transposons are larger (> 5 kb) and highly variable in their gene content. Beside genes for movement, transposons are more complex versions of insertion elements that further encode additional genetic information (i.e. metal and antibiotic resistance determinants) that might be beneficial for the survival or the adaptation of the bacteria. Usually, transposable elements exhibit highly variable frequencies of transposition ranging between 10 and 7 to 10–2 per generation. For movement, the DNA of the target sequence and of the ends of the transposon is cut. Thereafter, the ends of the transposon and target DNA are joined and replication takes place either by a replicative or non-replicative mechanism, in which the complete transposon or only short fragments at the end of the insertion site are replicated, respectively. Insertion elements usually exhibit short terminal inverted repeats at both ends, which provide target sites for homologous recombination. IS elements can cause rearrangement or deletion and contribute to the plasticity of the genome, bacterial adaptation and genome evolution.
A diverse set of tools for IS and/or transposon prediction is available. The publication of Bergman and Quesneville  provides a good overview on available tools and their prediction strategies. A comprehensive actively curated summary of IS prediction tools is also available on the homepage of the Bergman laboratory (http://bergmanlab.genetics.uga.edu/). In general, prediction tools for transposable elements follow a broad range of approaches that can be based on de novo repeat detection, sequence homologies, the genetic structure and/or comparative analysis. Tools (i.e. Reputer, RepeatMatch, RepeatFinder, PILER, ReAS) using de novo repeat detection are typically used for the identification of novel transposable elements. This approach relies on the identification of DNA repetitions in assembled data and is therefore dependent on sequence quality and the used assembling algorithm. Nevertheless, differentiation between repeats from transposable elements and other repetitive sequences is still a challenge. Tools that are based on the homology-matching approach for the detection of similarities to coding sequences of known transposable elements are thus biased and dependent on the current level of knowledge. Furthermore, these tools also fail to identify transposable elements without coding sequences. Tools predicting transposable elements on the basis of the genetic structure (i.e. LTR_STRUC, SMaRTFinder) rely on identification of repeat regions. The approach has been mostly used for the prediction of long terminal repeat retrotransposons. Other approaches rely on comparative genomic-based methods , that search for large insertions in multiple alignments that were created by transpositions. However, methods using this approach are dependent on the activity of the transposable elements. Therefore, without any transposition (i.e. if ancestral transposable elements are present) the tools will not detect transposable elements. As all of these approaches rely on important features of transposable elements, best practice will be observed with tools implementing more than one of them .
Typing of antimicrobial resistance
Naturally, antimicrobials are produced as secondary metabolites by bacteria and fungi from soil and marine habitats to inhibit the growth of other organisms and thus to gain a competitive advantage . When cells are able to grow in presence of an antibiotic, they are classified as antimicrobial resistant. Antimicrobial Resistance (AMR) is a natural phenomenon, as old as the antibiotic substances themselves and many bacteria co-existing with antimicrobial-producers have developed intrinsic resistant mechanisms . In addition, AMR can also be acquired by formerly susceptible bacteria. History has shown that shortly after the introduction of a certain antimicrobial in human or veterinary medicine, resistant bacterial clones emerged and spread in human and animal populations. This phenomenon was attributed to the selection pressure caused by antimicrobial usage . Development of AMR in human pathogens is accompanied by increasing mortality rates and economic costs and represents a major public health burden in the twenty-first century . Generally, AMR can occur through various mechanisms including: i) degradation or enzymatic modification of the antimicrobial, ii) overproduction, protection or modification of the antimicrobial target, iii) antimicrobial efflux and iv) change in cell permeability resulting in restricted access to the target site [116,117,118]. Formerly susceptible microorganisms can acquire AMR either by chromosomal point mutations, through overexpression or duplication of antimicrobial target genes, or through acquisition of antibiotic resistance determinants by horizontal gene transfer [118, 119].
To measure AMR in bacterial isolates conventional phenotypic screening can be performed to determine the concentration of a certain antimicrobial necessary to prevent bacterial growth (minimum inhibitory concentration (MIC) measurement) . Commercial and standardized 96-well broth microdilution panels belong to the most widely used methods to test bacterial growth in different antibiotics and antibiotic concentrations . The determined MIC values are compared to clinical breakpoints or epidemiological cut-off values to decide whether a bacterial isolate is susceptible or resistant to a certain antibiotic .
To closely investigate the mechanism underlying AMR, a genotypic characterization of isolates is necessary. Nowadays, AMR genes and point mutations associated with AMR can be identified in WGS data . When working with short-read sequencing data, AMR genes can be detected either using assembly-based or read-based approaches . In the assembly-based approach, short-read sequencing reads are first assembled into contigs and AMR genes are identified using BLASTN-based tools comparing the derived draft genomes to AMR reference gene databases [118, 120, 121]. Examples for assembly-based approaches include the ResFinder tool (now including PointFinder) searching the ResFinder database and the Resistance Gene Identifier (RGI) searching the Comprehensive Antibiotic Resistance Database (CARD) [118, 122, 123]. Both tools are able to identify acquired resistance genes as well as point mutations and are available as web-based or standalone versions . In read-based approaches, short-reads are either aligned to reference databases using pairwise alignment tools, as implemented by SRST2, or split into shorter k-mers which are subsequently mapped to a k-mer database obtained from reference sequences, as implemented in KmerResistance or the latest ResFinder 3.2 version (when submitting raw reads) [64, 118, 124]. These methods have in common that they can detect acquired antimicrobial resistance genes, but are not able to identify point mutations associated with antimicrobial resistance. Moreover, information about regulatory elements located upstream or downstream of resistance genes are not provided when using read-based approaches . Although these methods are less computationally demanding as assemblies are not required, they provide an advantage when dealing with metagenomics samples, as resistance genes in less abundant organisms from complex samples can be identified despite low coverage . For reliable resistance gene identification, resistance gene databases have to be continuously updated. One disadvantage of common AMR databases is, that novel or remote homologous AMR genes from less well studied bacteria might be missed, for the reason that these databases are heavily biased towards easy-to-cultivate human pathogens . One approach to overcome this bias is, to use databases which include antibiotic resistance determinants from metagenomics samples, e.g. ResFinderFG . Another approach is to use Hidden Markov model-based databases such as Resfams, which were developed to identify potential AMR genes with the same function, but low sequence identity to known AMR genes [118, 126].
To predict the resistance phenotype (MIC values) from genotypic data, rules-based or machine learning approaches might be used [127, 128]. Rules-based algorithms predict AMR phenotypes using curated reference sets of genes and point mutations involved in resistance, whereas machine-learning algorithms use a model built from a training set comprised of WGS and phenotypic data of resistant isolates [127, 128]. Rules-based methods can be used, when the factors contributing to AMR are well known. When information about the underlying mechanism of resistance is insufficient, prediction of MIC values based on reference-free machine learning may be the better approach. Nguyen et al.  developed extreme gradient boosting (XGBoost)-based machine learning models for the prediction of MICs for 15 antibiotics in non-typhoidal Salmonella strains from whole-genome sequencing data. Nguyen and colleagues used datasets with available WGS and phenotypic AMR data to train their models, which were subsequently able to predict MICs of other Salmonella strains without information about the resistance phenotype or genes involved in molecular resistance mechanisms. This reference-free approach for predicting MIC from whole-genome sequencing data can be applied to other pathogens relevant for surveillance or clinical diagnostics and might even be used to detect new genomic features involved in AMR . However, complete replacement of phenotypic AMR measurement by molecular AMR prediction approaches is not advised, given that bacterial strains continue to evolve and new resistance mechanisms are going to emerge, which may be overlooked as they are not represented in AMR databases or in the datasets used to train machine learning models. Therefore, phenotypic testing of a representative genomic diversity of strains needs to be maintained to ensure that genotypic AMR results do not diverge from the true AMR phenotype over time .
Subtypes within different genus of food-born pathogenic bacteria can be differentiated by their highly variable antigenic surface structures. The presence of an antigen can be detected through a series of immunological tests, in which cells are mixed with specific antisera to induce agglutination. Derived from these serological tests subtypes are commonly known as serovars or serotypes. The distinction of foodborne bacteria into serovars, starting from the 1930s has proven extremely useful for the reason that characteristics such as host specificity, virulence and pathogenicity usually correlate well with serovar assignments. Consequently, serovar assignment has provided scientists, public health experts and the general public with an effective terminology and a perquisite for monitoring and surveillance schemes. To date, about 2600 different Salmonella serovars have been identified . Within Escherichia coli there are approximately 190 known serovars , while Shigella spp. are differentiated in 54 serovars . There are 47 recognized serovars of Campylobacter jejuni  and 13 serovars for Listeria monocytogenes . In general, serotyping is based on the somatic O antigen, a cell surface protein and the H antigen, which forms part of the flagella (for serotyping of Shigella only the O antigen is of consideration). Serotyping of C. jejuni is slightly different and is based on the capsule polysaccharide (CPS) . Each known antigen is assigned a number and letter code, which are then combined into a seroformula according to an established scheme, such as the White-Kauffmann-Le Minor scheme for Salmonella , the Shigatoxin-producing E. coli (STEC) scheme  and the Penner scheme for C. jejuni .
Although traditional laboratory serotyping does not require expensive equipment, it is time- and resource consuming, as well as labour-intensive and can be limited by the non-expression of surface antigens. To overcome these drawbacks, several in silico methods have been developed in recent years, which analyse sequencing data derived from WGS to predict the serovar of an isolate. An overview of currently available tools for in silico serovar prediction is shown in Table 3.
Different strategies can be applied to infer serovar predictions from sequencing data. The most common is the detection of sequence differences that cause variations in either the O or the H antigen. In general, tools that follow this approach, such as SeqSero  and SerotypeFinder , implement a mapping alignment, which aligns the obtained sequencing reads to a reference database of antigen allele sequences and then assign the antigenic formula and the serovar name based on the best scoring alignments. It is also possible to break reads into k-mers, which are then compared to the frequency of unique k-mers of serotype determinants as implemented in SeqSero2 . A difficulty of these approaches is that usually there is no single gene encoding the antigens. For example the O antigen of Salmonella is determined by the wzx flippase gene the wzy polymerase gene as well as additional genes from the rfb cluster. Another issue is that some closely related serovars share the same antigenic seroformula, but feature minor differences in their O antigenic factors, such as S. enterica serovar Kottbus and S. enterica serovar Ferruch.
Another approach for in silico serovar prediction is to infer serovars from multi-locus sequence types, e.g. the Salmonella 7-gene Multi-Locus Sequence Typing (MLST) scheme , as implemented in MOST . Sequence types have been shown to correlate well with serovars, although one weakness of this approach is that sometimes more than one serovar is associated with a sequence type. Furthermore serovar prediction fails when an isolate features a novel sequence type, for which no associated serovar is available in the database. A continuation of this strategy is the determination of serovar predictions from cgMLST, as implemented in SISTR . In this method the cgMLST of an isolate is determined and a pairwise distance matrix between any two genomes is computed. From the distance matrix, isolates are hierarchically clustered and the serovar is predicted based on the dominant serovar of the respective cluster. This whole genome based method refines serovar predictions by considering the phylogenetic context and is especially useful when draft genome assemblies contain incomplete antigenic regions.
In addition to these methods, several studies have further investigated the utility of lineage-specific gene markers for the identification of polyphyletic serovars [142,143,144]. However, we are not aware of any currently publicly available program that implements the findings from these studies. Furthermore, a recently published package for R explores the possibility to predict serovars of Salmonella enterica based on the sequence of CRISPR spacer pairs .
Benchmarking studies and comparative performance assessment of in silico serotyping tools attest a medium to high correlation with conventional serotyping (70–95% agreement) [146,147,148], which is likely to improve further in the future. It is important to note that all tools, regardless of their respective approach rely heavily on the underlying databases. Most tools do not update reference databases, rendering prediction results less accurate for novel and / or rare serovars. Furthermore the quality of the sequencing data can have an impact on robust prediction, especially if tools require assembled draft genomes as input. Since there is great variety in assembly algorithms, the chosen algorithm may also have an effect on serovar predictions .
The availability of online web interfaces for different tools (for example SISTR, SeqSero, SalmonellaTypeFinder, SerotypeFinder), make in silico serotyping tools easily and widely accessible. Despite their advantages they are not suitable for high-throughput, independent, reliable and reproducible results generation. Only their command-line program versions can be integrated into in-house bacterial characterization analysis pipelines, which allow rapid, efficient, customized and controlled bioinformatics analysis of WGS data on a day-to-day basis.
Overall, in silico serotyping is a rapid, efficient, cheap and reproducible analysis process. However, further benchmarking and comparison studies are needed to reliable evaluate the available tools. Furthermore, continuously updated curated and extensive databases, as well as standardization of serovar names are needed for accurate and comparable in silico serovar prediction.
WGS analysis platforms
As discussed previously, a great variety of methods and tools is available to analyse and characterize bacterial pathogens. Many of these tools are implemented for Unix environments and require at least some bioinformatics expertise for usage. To enable epidemiologists, microbiologists and other researchers to interpret the biological coherencies, there is a variety of online platforms including commercial software available for collection, analysis and visualization of sequencing data [149, 150]. These platforms generally start their analyses from raw sequencing data or assemblies and rely on different approaches for organization of metadata, sequencing data, and various analysis steps. The major distinction of all presented platforms are, whether they use a SNP or an allele calling (gene-by-gene) approach for hierarchical clustering to calculate phylogenies from WGS data (compare Table 4). Most platforms implementing cgMLST provide their own cgMLST schemes or host a collection of existing ones. While the choice of scheme is vital for the comparability of results, the number of well tested schemes for non-model organisms is limited. A list of currently available schemes is given in Table 2. If no suitable scheme is available, users can generate their own scheme, by using tools such as Ridom SeqSphere+  or chewBBACA , always provided that a sufficient number of reference genomes is available.
Platforms can also be differentiated by whether they are web-based or run in local instances. While web-based tools are often free for use and do not require computational power from the user, they often demand users to deposit the analyzed data in public repositories. This is especially challenging for hospital laboratories and private sector companies, who are often hesitant to share their data publically. However, it is a necessity to keep databases up to date in order to be able to detect potential links between isolates from different sources .
All platforms have their own unique set of pipelines and tools for the analysis of WGS of different bacterial species. Fundamental questions for many real-world scenarios include analyses such as AMR detection, pathotyping and virulence gene detection, serotyping and phylogenomics. Each of these features is presented for the selected tools in Fig. 1. Table 4 provides an overview of the most widely used platforms and their specifications with regard to the functionality described previously. A more detailed overview of some of these tools has been composed in an EFSA/ECDC technical report .
The major advantage of applying online platforms or commercial software tools for WGS analyses is that usage requires no or only limited bioinformatics knowledge. Since users often have no insight regarding the underlying algorithms and parameters of the tools, this might lead to unreliable analyses and in last consequence to misinterpretation of the result data. Therefore, training of users and well-written documentation of platforms and tools is a vital prerequisite for effective usage of these platforms.
Many typing tools and databases have been developed to allow the meaningful analyses of WGS data for a variety of investigations. Sequencing technologies are still rapidly evolving, generating more accurate data, for less money with greater user-friendliness. This leads to the technology being implemented on a broad, worldwide scale. The current dynamic in the development of new techniques and analysis tools and the transformation of these into routine disease surveillance, will require a great amount of standardization to ensure the comparability of WGS data and results between laboratories. One major issue is the harmonized assignment of new sequence types according to cgMLST/wgMLST, which theoretically would require a large centrally organized curated database. One workaround solution could be the implementation of allele hashing instead of the use of simple allele numbers, since hash-tagging allows for the decentralized allocation of sequencing types. Considering the great variety of typing tools, as well as their continuous development, standardization may not be a viable option. Instead, the careful validation of those tools with well-documented data test sets could ensure that the results are “truth”. By this approach, WGS data of bacterial isolates might not be directly comparable, but interpretation of result data and derived conclusions would be overall similar. Standards should be developed for the internationally accepted validation of typing tools  and benchmarking data sets for validation shall be extended. This would make the need for a specific validated cgMLST nomenclature system for a particular bacterial species obsolete. The databases underlying bioinformatics tools, e.g. for serotyping or virulence typing, need to be professionally curated to avoid erroneous results. This demands human and hardware resources and needs to be addressed to decision makers on a global scale e.g. FAO, WHO, or OECD. International biological repository institutions for sequences such as ENA (Europe), NCBI (U.S.A.) and DDBJ (Japan) would be well suited to host such tools. The NCBI Pathogen Detection Pipeline  is a promising development for a standardized analysis pipeline, especially if shared with a broader scientific community and which could be expanded to include a variety of tools for analyzing WGS data (e.g. cgMLST, serotyping, virulence).
SNP-based mapping approaches are problematic for the comparisons of genetically highly diverse bacteria, such as Campylobacter spp. and Helicobacter pylori due to large scale fluctuations disrupting the clonality of the species. For those pathogens, typing approaches could be more effective in describing the evolutionary relationships between these diverse microorganisms. Although reference-free assembly followed by gene-by-gene approaches are more robust for horizontal gene transfer events misinterpretation is still possible. Better visualization tools for the examination of the phylogenetic, geospatial and temporal distribution of isolates on a global as well local scale are urgently needed. The visualization of phylogenomic data in combination with metadata is a crucial step in understanding the complex relationships between isolates, informing further actions and decisions. A plain data collection in regard to surveillance of pathogens is not sufficient. Some projects such as Microreact (https://microreact.org) or NextStrain (https://nextstrain.org/) have developed tools for this purpose, but these need to be more broadly accessible and applicable for official laboratories involved in routine surveillance. We believe that visualization of typing results could be much improved, leading to a deepened understanding of the evolution of pathogens and disease outbreaks.
Beside good visualizations, successful interpretation of typing data requires equal input and expertise from molecular biologists, epidemiologists and bioinformaticians. The importance of all three fields should be reflected in team structures, education and research programs. In future, most phenotypical and PCR based methods can be substituted with in silico WGS analyses. Others, such as traditional phenotypic antimicrobial resistance assays will continue to be of high relevance since there is still an insufficient understanding of the physiological links between geno- and phenotype. The decision which types of analysis can be switched from traditional microbial testing to WGS will heavily depend on evaluation and validation studies, as well as on a general increase of knowledge and understanding of WGS data analysis within the community. Scientists who analyse WGS data currently use software which are built on mechanistic model-based approaches for comparative genomics and genome characterization. Recently however, bioinformaticians have taken advantage of artificial intelligence and its sub-discipline machine learning . Whilst mechanistic model-based systems are based on simplified mathematical formulations considering input-output relationships, machine learning makes predictions on large-scale datasets that bypass the need for causality . In the future, typing approaches could tremendously benefit from this trend, with the potential to refine these methods with an unprecedented resolution .
Whole genome sequencing technologies have pushed the development of advanced typing approaches for bacterial genome comparisons, which are primarily based on SNP and gene-by-gene analyses. Both methods provide often similar conclusions, but may vary in their resolution and suitability for different species and epidemiological cases. The construction and interpretation of phylogenetic trees derived from these data, makes it possible to identify transmission events and to understand the dynamic of outbreaks, which is still a challenge. As more data will be generated and as more documented examples of genetic relationships in terms of spatial and temporal variations will be described, the better we will understand the evolution of bacterial species and their variants in human, animal, food and the environment. The high resolution of WGS nullifies simple thresholds of relatedness as applied for classical molecular typing methods. We believe that the public and animal health, food safety and environmental scientific disciplines should extend their collaboration to benefit from this immense opportunity to build more efficient One Health tools and databases. Furthermore new approaches such as machine learning for robust phylotyping and for the interpretation of WGS data need to be explored and implemented where their usefulness is demonstrated. The development of advanced open-source and easy-to-use typing tools will play a central role in achieving this goal. However, a successful routine global surveillance requires the consolidation of the developed tools as a perquisite for the setting of international standards.
Availability of data and materials
There is no Supplementary Material for this article available.
Basic local alignment search tool
Core genome multilocus sequence typing
Graphical user interface
Hierarchical clustering of cgMLST
Hidden markov model
Integrative and conjugative element
Mobile genetic element
Minimum inhibitory concentration
Multilocus enzyme electrophoresis
Multilocus sequence typing
Multilocus variable-number tandem-repeat analysis
Mating pair formation
Polymerase chain reaction
Pulsed field gel electrophoresis
Randomized axelerated maximum likelihood
Support vector machine
Whole genome sequencing
Rossello-Mora R, Amann R. The species concept for prokaryotes. FEMS Microbiol Rev. 2001;25(1):39–67.
Hood AM. Phage typing of Staphylococcus aureus. J Hyg. 1953;51(1):1–15.
Watson JD, Crick FH. Molecular structure of nucleic acids; a structure for deoxyribose nucleic acid. Nature. 1953;171(4356):737–8.
Tenover FC. Plasmid fingerprinting. A tool for bacterial strain identification and surveillance of nosocomial and community-acquired infections. Clin Lab Med. 1985;5(3):413–36.
Gerner-Smidt P, Hise K, Kincaid J, Hunter S, Rolando S, Hyytia-Trees E, et al. PulseNet USA: a five-year update. Foodborne Pathog Dis. 2006;3(1):9–19.
Rabinow P. Making PCR: a story of biotechnology. Chicago: University of Chicago Press; 1996. p. 190.
Maiden MC. Multilocus sequence typing of bacteria. Annu Rev Microbiol. 2006;60:561–88.
Maiden MCJ, Bygraves JA, Feil E, Morelli G, Russell JE, Urwin R, et al. Multilocus sequence typing: a portable approach to the identification of clones within populations of pathogenic microorganisms. Proc Natl Acad Sci U S A. 1998;95(6):3140–5.
Achtman M, Wain J, Weill FX, Nair S, Zhou Z, Sangal V, et al. Multilocus sequence typing as a replacement for serotyping in Salmonella enterica. PLoS Pathog. 2012;8(6):e1002776.
Lindstedt BA. Multiple-locus variable number tandem repeats analysis for genetic fingerprinting of pathogenic bacteria. Electrophoresis. 2005;26(13):2567–82.
Nadon CA, Trees E, Ng LK, Møller-Nielsen E, Reimer A, Maxwell N, et al. Development and application of MLVA methods as a tool for inter-laboratory surveillance. Euro Surveill. 2013;18(35):20565.
Hopkins KL, Peters TM, de Pinna E, Wain J. Standardisation of multilocus variable-number tandem-repeat analysis (MLVA) for subtyping of Salmonella enterica serovar Enteritidis. Euro Surveill. 2011;16(32):19942.
Ronholm J, Nasheri N, Petronella N, Pagotto F. Navigating microbiological food safety in the era of whole-genome sequencing. Clin Microbiol Rev. 2016;29(4):837–57.
Jagadeesan B, Gerner-Smidt P, Allard MW, Leuillet S, Winkler A, Xiao YH, et al. The use of next generation sequencing for improving food safety: translation into practice. Food Microbiol. 2019;79:96–115.
Dallman T, Ashton P, Schafer U, Jironkin A, Painset A, Shaaban S, et al. SnapperDB: a database solution for routine sequencing analysis of bacterial isolates. Bioinformatics. 2018;34(17):3028–9.
Zhou Z, Alikhan N-F, Mohamed K, Group tAS, Achtman M. The user’s guide to comparative genomics with EnteroBase. Three case studies: micro-clades within Salmonella enterica serovar Agama, ancient and modern populations of Yersinia pestis, and core genomic diversity of all Escherichia. BioRxiv. 2019. https://www.biorxiv.org/content/10.1101/613554v1, https://0-doi-org.brum.beds.ac.uk/10.1101/613554.
Maiden MC, Jansen van Rensburg MJ, Bray JE, Earle SG, SA F, Jolley KA, et al. MLST revisited: the gene-by-gene approach to bacterial genomics. Nat Rev Microbiol. 2013;11(10):728–36.
Zhou Z, Alikhan NF, Sergeant MJ, Luhmann N, Vaz C, Francisco AP, et al. GrapeTree: visualization of core genomic relationships among 100,000 bacterial pathogens. Genome Res. 2018;28(9):1395–404.
Bratcher HB, Corton C, Jolley KA, Parkhill J, Maiden MC. A gene-by-gene population genomics platform: de novo assembly, annotation and genealogical analysis of 108 representative Neisseria meningitidis genomes. BMC Genomics. 2014;15:1138.
Moura A, Criscuolo A, Pouseele H, Maury MM, Leclercq A, Tarr C, et al. Whole genome-based population biology and epidemiological surveillance of Listeria monocytogenes. Nat Microbiol. 2016;2:16185.
Van Walle I, Bjorkman JT, Cormican M, Dallman T, Mossong J, Moura A, et al. Retrospective validation of whole genome sequencing-enhanced surveillance of listeriosis in Europe, 2010 to 2015. Euro Surveill. 2018;23(33):1700798.
Jolley KA, Hill DM, Bratcher HB, Harrison OB, Feavers IM, Parkhill J, et al. Resolution of a meningococcal disease outbreak from whole-genome sequence data with rapid web-based analysis methods. J Clin Microbiol. 2012;50(9):3046–53.
Sheppard SK, Jolley KA, Maiden MC. A gene-by-gene approach to bacterial population genomics: whole genome MLST of Campylobacter. Genes (Basel). 2012;3(2):261–77.
Pearce ME, Alikhan NF, Dallman TJ, Zhou Z, Grant K, Maiden MCJ. Comparative analysis of core genome MLST and SNP typing within a European Salmonella serovar Enteritidis outbreak. Int J Food Microbiol. 2018;274:1–11.
Vincent C, Usongo V, Berry C, Tremblay DM, Moineau S, Yousfi K, et al. Comparison of advanced whole genome sequence-based methods to distinguish strains of Salmonella enterica serovar Heidelberg involved in foodborne outbreaks in Quebec. Food Microbiol. 2018;73:99–110.
Henri C, Leekitcharoenphon P, Carleton HA, Radomski N, Kaas RS, Mariet JF, et al. An assessment of different genomic approaches for inferring phylogeny of Listeria monocytogenes. Front Microbiol. 2017;8:2351.
Bakker HC, Switt AI, Cummings CA, Hoelzer K, Degoricija L, Rodriguez-Rivera LD, et al. A whole-genome single nucleotide polymorphism-based approach to trace and identify outbreaks linked to a common Salmonella enterica subsp. enterica serovar Montevideo pulsed-field gel electrophoresis type. Appl Environ Microbiol. 2011;77(24):8648–55.
Felsenstein J. Evolutionary trees from DNA sequences: a maximum likelihood approach. J Mol Evol. 1981;17(6):368–76.
Inns T, Ashton PM, Herrera-Leon S, Lighthill J, Foulkes S, Jombart T, et al. Prospective use of whole genome sequencing (WGS) detected a multi-country outbreak of Salmonella Enteritidis. Epidemiol Infect. 2017;145(2):289–98.
Taylor AJ, Lappi V, Wolfgang WJ, Lapierre P, Palumbo MJ, Medus C, et al. Characterization of foodborne outbreaks of Salmonella enterica serovar Enteritidis with whole-genome sequencing single nucleotide polymorphism-based analysis for surveillance and outbreak detection. J Clin Microbiol. 2015;53(10):3334–40.
Carrico JA, Rossi M, Moran-Gilad J, Van Domselaar G, Ramirez M. A primer on microbial bioinformatics for nonbioinformaticians. Clin Microbiol Infect. 2018;24(4):342–9.
Sahl JW, Lemmer D, Travis J, Schupp JM, Gillece JD, Aziz M, et al. NASP: an accurate, rapid method for the identification of SNPs in WGS datasets that supports flexible input and output formats. Microb Genom. 2016;2(8):e000074.
Kaas RS, Leekitcharoenphon P, Aarestrup FM, Lund O. Solving the problem of comparing whole bacterial genomes across different sequencing platforms. PLoS One. 2014;9(8):e104984.
Pightling AW, Petronella N, Pagotto F. Choice of reference sequence and assembler for alignment of Listeria monocytogenes short-read sequence data greatly influences rates of error in SNP analyses. PLoS One. 2014;9(8):e104579.
Li H. A statistical framework for SNP calling, mutation discovery, association mapping and population genetical parameter estimation from sequencing data. Bioinformatics. 2011;27(21):2987–93.
DePristo MA, Banks E, Poplin R, Garimella KV, Maguire JR, Hartl C, et al. A framework for variation discovery and genotyping using next-generation DNA sequencing data. Nat Genet. 2011;43(5):491–8.
Garrison E, Marth G. Haplotype-based variant detection from short-read sequencing. arXiv. 2012. https://arxiv.org/abs/1207.3907.
Davis S, Pettengill JB, Luo Y, Payne J, Shpuntoff A, Rand H, et al. CFSAN SNP pipeline: an automated method for constructing SNP matrices from next-generation sequence data. PeerJ Computer Sci. 2015;1:e20.
Yoshimura D, Kajitani R, Gotoh Y, Katahira K, Okuno M, Ogura Y, et al. Evaluation of SNP calling methods for closely related bacterial isolates and a novel high-accuracy pipeline: BactSNP. Microb Genom. 2019;5(5):e000261.
Hasman H, Saputra D, Sicheritz-Ponten T, Lund O, Svendsen CA, Frimodt-Moller N, et al. Rapid whole-genome sequencing for detection and characterization of microorganisms directly from clinical samples. J Clin Microbiol. 2014;52(1):139–46.
Gardner SN, Slezak T, Hall BG. kSNP3.0: SNP detection and phylogenetic analysis of genomes without genome alignment or reference genome. Bioinformatics. 2015;31(17):2877–8.
Mercante JW, Morrison SS, Desai HP, Raphael BH, Winchell JM. Genomic analysis reveals novel diversity among the 1976 Philadelphia Legionnaires’ disease outbreak isolates and additional ST36 strains. PLoS One. 2016;11(9):e0164074.
Carroll LM, Wiedmann M, Mukherjee M, Nicholas DC, Mingle LA, Dumas NB, et al. Characterization of emetic and diarrheal Bacillus cereus strains from a 2016 foodborne outbreak using whole-genome sequencing: addressing the microbiological, epidemiological, and bioinformatic challenges. Front Microbiol. 2019;10:144.
Lees JA, Harris SR, Tonkin-Hill G, Gladstone RA, Lo SW, Weiser JN, et al. Fast and flexible bacterial genomic epidemiology with PopPUNK. Genome Res. 2019;29(2):304–16.
Ondov BD, Treangen TJ, Melsted P, Mallonee AB, Bergman NH, Koren S, et al. Mash: fast genome and metagenome distance estimation using MinHash. Genome Biol. 2016;17(1):132.
Harris SR. SKA: Split Kmer Analysis Toolkit for Bacterial Genomic Epidemiology. bioRxiv. 2018. https://www.biorxiv.org/content/10.1101/453142v1.
Wyres KL, TNT N, MMC L, Judd LM, van Vinh Chau N, DAB D, et al. Genomic surveillance for hypervirulence and multi-drug resistance in invasive Klebsiella pneumoniae from south and southeast Asia. bioRxiv. 2019. https://www.biorxiv.org/content/10.1101/557785v1.full.
Price MN, Dehal PS, Arkin AP. FastTree: computing large minimum evolution trees with profiles instead of a distance matrix. Mol Biol Evol. 2009;26(7):1641–50.
Stamatakis A, Ludwig T, Meier H. RAxML-III: a fast program for maximum likelihood-based inference of large phylogenetic trees. Bioinformatics. 2005;21(4):456–63.
Nguyen L-T, Schmidt HA, von Haeseler A, Minh BQ. IQ-TREE: a fast and effective stochastic algorithm for estimating maximum-likelihood phylogenies. Mol Biol Evol. 2014;32(1):268–74.
Ronquist F, Huelsenbeck JP. MrBayes 3: Bayesian phylogenetic inference under mixed models. Bioinformatics. 2003;19(12):1572–4.
Suchard MA, Lemey P, Baele G, Ayres DL, Drummond AJ, Rambaut A. Bayesian phylogenetic and phylodynamic data integration using BEAST 1.10. Virus Evol. 2018;4(1):vey016.
Lees JA, Kendall M, Parkhill J, Colijn C, Bentley SD, Harris SR. Evaluation of phylogenetic reconstruction methods using bacterial whole genomes: a simulation based study. Wellcome Open Res. 2018;3(33):1-29.
Croucher NJ, Page AJ, Connor TR, Delaney AJ, Keane JA, Bentley SD, et al. Rapid phylogenetic analysis of large samples of recombinant bacterial whole genome sequences using Gubbins. Nucleic Acids Res. 2014;43(3):e15–e.
Peterson J. Bacterial pathogenesis. In: Baron S, editor. Medical Microbiology 4th edition. Galveston: University of Texas Medical Branch; 1996.
Niu C, Yu D, Wang Y, Ren H, Jin Y, Zhou W, et al. Common and pathogen-specific virulence factors are different in function and structure. Virulence. 2013;4(6):473–82.
Rendon MA, Saldana Z, Erdem AL, Monteiro-Neto V, Vazquez A, Kaper JB, et al. Commensal and pathogenic Escherichia coli use a common pilus adherence factor for epithelial cell colonization. Proc Natl Acad Sci U S A. 2007;104(25):10637–42.
Tagini F, Greub G. Bacterial genome sequencing in clinical microbiology: a pathogen-oriented review. Eur J Clin Microbiol Infect Dis. 2017;36(11):2007–20.
Cassat J, Dunman PM, Murphy E, Projan SJ, Beenken KE, Palm KJ, et al. Transcriptional profiling of a Staphylococcus aureus clinical isolate and its isogenic agr and sarA mutants reveals global differences in comparison to the laboratory strain RN6390. Microbiology. 2006;152(Pt 10):3075–90.
Fournier PE, El Karkouri K, Leroy Q, Robert C, Giumelli B, Renesto P, et al. Analysis of the rickettsia africae genome reveals that virulence acquisition in Rickettsia species may be explained by genome reduction. BMC Genomics. 2009;10:166.
Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ. Basic local alignment search tool. J Mol Biol. 1990;215(3):403–10.
Boratyn GM, Schaffer AA, Agarwala R, Altschul SF, Lipman DJ, Madden TL. Domain enhanced lookup time accelerated BLAST. Biol Direct. 2012;7:12.
Feldgarden M, Brover V, Haft DH, Prasad AB, Slotta DJ, Tolstoy I, et al. Validating the AMRFinder tool and resistance gene database by using antimicrobial resistance genotype-phenotype correlations in a collection of isolates. Antimicrob Agents Chemother. 2019;63(11):e00483-19.
Inouye M, Dashnow H, Raven LA, Schultz MB, Pope BJ, Tomita T, et al. SRST2: rapid genomic surveillance for public health and hospital microbiology labs. Genome Med. 2014;6(11):90.
Hunt M, Mather AE, Sanchez-Buso L, Page AJ, Parkhill J, Keane JA, et al. ARIBA: rapid antimicrobial resistance genotyping directly from sequencing reads. Microb Genom. 2017;3(10):e000131.
Chen L, Yang J, Yu J, Yao Z, Sun L, Shen Y, et al. VFDB: a reference database for bacterial virulence factors. Nucleic Acids Res. 2005;33:D325–8.
Sayers S, Li L, Ong E, Deng S, Fu G, Lin Y, et al. Victors: a web-based knowledge base of virulence factors in human and animal pathogens. Nucleic Acids Res. 2019;47(D1):D693–700.
Mao C, Abraham D, Wattam AR, Wilson MJ, Shukla M, Yoo HS, et al. Curation, integration and visualization of bacterial virulence factors in PATRIC. Bioinformatics. 2015;31(2):252–8.
Hacker J, Bender L, Ott M, Wingender J, Lund B, Marre R, et al. Deletions of chromosomal regions coding for fimbriae and hemolysins occur in vitro and in vivo in various extraintestinal Escherichia coli isolates. Microb Pathog. 1990;8(3):213–25.
Ho Sui SJ, Fedynak A, Hsiao WW, Langille MG, Brinkman FS. The association of virulence factors with genomic islands. PLoS One. 2009;4(12):e8094.
Hacker J, Blum-Oehler G, Muhldorfer I, Tschape H. Pathogenicity islands of virulent bacteria: structure, function and impact on microbial evolution. Mol Microbiol. 1997;23(6):1089–97.
Yoon SH, Park YK, Kim JF. PAIDB v2.0: exploration and analysis of pathogenicity and resistance islands. Nucleic Acids Res. 2015;43(Database issue):D624–30.
Lu B, Leong HW. Computational methods for predicting genomic islands in microbial genomes. Comput Struct Biotechnol J. 2016;14:200–6.
Che D, Chen B. An accurate genomic island prediction method for sequenced bacterial and archaeal genomes. J Proteomic Bioinform. 2014;7(8):214-22.
Bertelli C, Tilley KE, Brinkman FSL. Microbial genomic island discovery, visualization and analysis. Brief Bioinform. 2019;20(5):1685-98.
Gupta A, Kapil R, Dhakan DB, Sharma VK. MP3: a software tool for the prediction of pathogenic proteins in genomic and metagenomic data. PLoS One. 2014;9(4):e93907.
Rentzsch S, Deneke C, Nitsche A, Renard BY. Predicting bacterial virulence factors – evaluation of machine learning and negative data strategies. Brief Bioinform. 2019:bbz076; https://0-doi-org.brum.beds.ac.uk/10.1093/bib/bbz076.
Garg A, Gupta D. VirulentPred: a SVM based prediction method for virulent proteins in bacterial pathogens. BMC Bioinformatics. 2008;9:62.
Cadag E, Tarczy-Hornoch P, Myler PJ. Learning virulent proteins from integrated query networks. BMC Bioinformatics. 2012;13:321.
Zheng LL, Li YX, Ding J, Guo XK, Feng KY, Wang YJ, et al. A comparison of computational methods for identifying virulence factors. PLoS One. 2012;7(8):e42517.
Tsai C-T, Huang W-L, Ho S-J, Shu L-S, Ho S-Y. Virulent-GO: prediction of virulent proteins in bacterial pathogens utilizing gene ontology terms. International Journal of Biological and Life Sciences. 2009;5(4):159-66.
Barash E, Sal-Man N, Sabato S, Ziv-Ukelson M. BacPaCS—bacterial pathogenicity classification via sparse-SVM. Bioinformatics. 2018;35(12):2001–8.
Cosentino S, Voldby Larsen M, Moller Aarestrup F, Lund O. PathogenFinder--distinguishing friend from foe using bacterial whole genome sequence data. PLoS One. 2013;8(10):e77302.
Iraola G, Vazquez G, Spangenberg L, Naya H. Reduced set of virulence genes allows high accuracy prediction of bacterial pathogenicity in humans. PLoS One. 2012;7(8):e42144.
Byrd AL, Perez-Rogers JF, Manimaran S, Castro-Nallar E, Toma I, McCaffrey T, et al. Clinical PathoScope: rapid alignment and filtration for accurate pathogen identification in clinical samples using unassembled sequencing data. BMC Bioinformatics. 2014;15:262.
Deneke C, Rentzsch R, Renard BY. PaPrBaG: a machine learning approach for the detection of novel pathogens from NGS data. Sci Rep. 2017;7:39194.
Bartoszewicz JM, Seidel A, Rentzsch R, Renard BY. DeePaC: predicting pathogenic potential of novel DNA with reverse-complement neural networks. Bioinformatics. 2020;36(1):81-89.
Jørgensen TS, Kiil AS, Hansen MA, Sorensen SJ, Hansen LH. Current strategies for mobilome research. Front Microbiol. 2014;5:750.
Leplae R, Lima-Mendez G, Toussaint A. A first global analysis of plasmid encoded proteins in the ACLAME database. FEMS Microbiol Rev. 2006;30(6):980–94.
Ghaly TM, Gillings MR. Mobile DNAs as ecologically and evolutionarily independent units of life. Trends Microbiol. 2018;26(11):904–12.
Frost LS, Leplae R, Summers AO, Toussaint A. Mobile genetic elements: the agents of open source evolution. Nat Rev Microbiol. 2005;3(9):722–32.
Singh PK, Bourque G, Craig NL, Dubnau JT, Feschotte C, Flasch DA, et al. Mobile genetic elements and genome evolution 2014. Mob DNA. 2014;5:26.
Song MJ, Schaack S. Evolutionary conflict between Mobile DNA and host genomes. Am Nat. 2018;192(2):263–73.
Iranzo J, Koonin EV, Prangishvili D, Krupovic M. Bipartite network analysis of the Archaeal Virosphere: evolutionary connections between viruses and capsidless mobile elements. J Virol. 2016;90(24):11043–55.
Lima-Mendez G, Van Helden J, Toussaint A, Leplae R. Reticulate representation of evolutionary and functional relationships between phage genomes. Mol Biol Evol. 2008;25(4):762–77.
Carattoli A, Zankari E, Garcia-Fernandez A, Voldby Larsen M, Lund O, Villa L, et al. In silico detection and typing of plasmids using PlasmidFinder and plasmid multilocus sequence typing. Antimicrob Agents Chemother. 2014;58(7):3895–903.
diCenzo GC, Finan TM. The Divided Bacterial Genome: Structure, Function, and Evolution. Microbiol Mol Biol Rev. 2017;81(3):e00019-17.
Werisch M, Berger U, Berendonk TU. Conjugative plasmids enable the maintenance of low cost non-transmissible plasmids. Plasmid. 2017;91:96–104.
Smillie C, Garcillan-Barcia MP, Francia MV, Rocha EP, de la Cruz F. Mobility of plasmids. Microbiol Mol Biol Rev. 2010;74(3):434–52.
Orlek A, Stoesser N, Anjum MF, Doumith M, Ellington MJ, Peto T, et al. Plasmid classification in an era of whole-genome sequencing: application in studies of antibiotic resistance epidemiology. Front Microbiol. 2017;8:182.
Vielva L, de Toro M, Lanza VF, de la Cruz F. PLACNETw: a web-based tool for plasmid reconstruction from bacterial genomes. Bioinformatics. 2017;33(23):3796–8.
Zetner A, Cabral J, Mataseje L, Knox NC, Mabon P, Mulvey M, et al. Plasmid Profiler: Comparative Analysis of Plasmid Content in WGS Data. bioRxiv. 2017:121350. https://0-doi-org.brum.beds.ac.uk/10.1101/121350.
Krawczyk PS, Lipinski L, Dziembowski A. PlasFlow: predicting plasmid sequences in metagenomic data using genome signatures. Nucleic Acids Res. 2018;46(6):e35.
Lilly J, Camps M. Mechanisms of Theta Plasmid Replication. Microbiol Spectr. 2015;3(1):PLAS-0029-2014.
Brussow H, Canchaya C, Hardt WD. Phages and the evolution of bacterial pathogens: from genomic rearrangements to lysogenic conversion. Microbiol Mol Biol Rev. 2004;68(3):560–602 table of contents.
Canchaya C, Fournous G, Brussow H. The impact of prophages on bacterial chromosomes. Mol Microbiol. 2004;53(1):9–18.
Hatfull GF, Hendrix RW. Bacteriophages and their genomes. Curr Opin Virol. 2011;1(4):298–303.
Mavrich TN, Hatfull GF. Bacteriophage evolution differs by host, lifestyle and genome. Nat Microbiol. 2017;2:17112.
Song W, Sun HX, Zhang C, Cheng L, Peng Y, Deng Z, et al. Prophage Hunter: an integrative hunting tool for active prophages. Nucleic Acids Res. 2019;47(W1):W74–80.
Bergman CM, Quesneville H. Discovering and detecting transposable elements in genome sequences. Brief Bioinform. 2007;8(6):382–92.
Caspi A, Pachter L. Identification of transposable elements using multiple alignments of related genomes. Genome Res. 2006;16(2):260–70.
Sengupta S, Chattopadhyay MK, Grossart H-P. The multifaceted roles of antibiotics and antibiotic resistance in nature. Front Microbiol. 2013;4:47.
Munita JM, Arias CA. Mechanisms of antibiotic resistance. Microbiol Spectr. 2016;4(2). https://0-doi-org.brum.beds.ac.uk/10.1128/microbiolspec VMBF-0016-2015.
Saga T, Yamaguchi K. History of antimicrobial agents and resistant bacteria. JMAJ. 2009;52:103–8.
Tacconelli E, Pezzani MD. Public health burden of antimicrobial resistance in Europe. Lancet Infect Dis. 2019;19(1):4–6.
Wright GD. Q&a: antibiotic resistance: where does it come from and what can we do about it? BMC Biol. 2010;8(1):123.
OpenStax College Microbiology, Microbiology. OpenStax CNX. Nov 2nd, 2016. http://email@example.com. Accessed 14 Jan 2020.
Boolchandani M, D’Souza AW, Dantas G. Sequencing-based methods and resources to study antimicrobial resistance. Nat Rev Genet. 2019;20(6):356–70.
van Hoek AHAM, Mevius D, Guerra B, Mullany P, Roberts AP, Aarts HJM. Acquired antibiotic resistance genes: an overview. Front Microbiol. 2011;2:203.
Anjum MF. Screening methods for the detection of antimicrobial resistance genes present in bacterial isolates and the microbiota. Future Microbiol. 2015;10(3):317–20.
Ellington MJ, Ekelund O, Aarestrup FM, Canton R, Doumith M, Giske C, et al. The role of whole genome sequencing in antimicrobial susceptibility testing of bacteria: report from the EUCAST subcommittee. Clin Microbiol Infect. 2017;23(1):2–22.
Zankari E, Hasman H, Cosentino S, Vestergaard M, Rasmussen S, Lund O, et al. Identification of acquired antimicrobial resistance genes. J Antimicrob Chemother. 2012;67(11):2640–4.
Jia B, Raphenya AR, Alcock B, Waglechner N, Guo P, Tsang KK, et al. CARD 2017: expansion and model-centric curation of the comprehensive antibiotic resistance database. Nucleic Acids Res. 2017;45(D1):D566–D73.
Clausen PT, Zankari E, Aarestrup FM, Lund O. Benchmarking of methods for identification of antimicrobial resistance genes in bacterial whole genome data. J Antimicrob Chemother. 2016;71(9):2484–8.
Hendriksen RS, Bortolaia V, Tate H, Tyson GH, Aarestrup FM, McDermott PF. Using genomics to track global antimicrobial resistance. Front Public Health. 2019;7:242.
Gibson MK, Forsberg KJ, Dantas G. Improved annotation of antibiotic resistance determinants reveals microbial resistomes cluster by ecology. ISME J. 2015;9(1):207–16.
Nguyen M, Long SW, McDermott PF, Olsen RJ, Olson R, Stevens RL, et al. Using machine learning to predict antimicrobial MICs and associated genomic features for nontyphoidal Salmonella. J Clin Microbiol. 2019;57(2):e01260–18.
Pesesky MW, Hussain T, Wallace M, Patel S, Andleeb S, Burnham C-AD, et al. Evaluation of machine learning and rules-based approaches for predicting antimicrobial resistance profiles in gram-negative bacilli from whole genome sequence data. Front Microbiol. 2016;7:1887.
Su M, Satola SW, Read TD. Genome-based prediction of bacterial antibiotic resistance. J Clin Microbiol. 2019;57(3):e01405–18.
Grimont PAD, Weill F-X. Antigenic formulae of the Salmonella serovars. 9th ed. France: WHO Collaborating Centre for Reference and Research on Salmonella, Institut Pasteur Paris; 2007.
Fratamico PM, DebRoy C, Liu Y, Needleman DS, Baranzoni GM, Feng P. Advances in molecular serotyping and subtyping of Escherichia coli. Front Microbiol. 2016;7:644.
Muthuirulandi Sethuvel DP, Devanga Ragupathi NK, Anandan S, Veeraraghavan B. Update on: Shigella new serogroups/serotypes and their antimicrobial resistance. Lett Appl Microbiol. 2017;64(1):8–18.
Pike BL, Guerry P, Poly F. Global distribution of Campylobacter jejuni Penner serotypes: a systematic review. PLoS One. 2013;8(6):e67375.
Doumith M, Buchrieser C, Glaser P, Jacquet C, Martin P. Differentiation of the major Listeria monocytogenes serovars by multiplex PCR. J Clin Microbiol. 2004;42(8):3819–22.
Karmali MA, Mascarenhas M, Shen S, Ziebell K, Johnson S, Reid-Smith R, et al. Association of genomic O island 122 of Escherichia coli EDL 933 with Verocytotoxin-producing Escherichia coli seropathotypes that are linked to epidemic and/or serious disease. J Clin Microbiol. 2003;41(11):4930–40.
Penner J, Hennessy J. Passive hemagglutination technique for serotyping Campylobacter fetus subsp. jejuni on the basis of soluble heat-stable antigens. J Clin Microbiol. 1980;12(6):732–7.
Zhang S, Yin Y, Jones MB, Zhang Z, Kaiser BLD, Dinsmore BA, et al. Salmonella serotype determination utilizing high-throughput genome sequencing data. J Clin Microbiol. 2015;53(5):1685-92.
Zhang S, Den-Bakker HC, Li S, Chen J, Dinsmore BA, Lane C, et al. SeqSero2: rapid and improved Salmonella serotype determination using whole genome sequencing data. Appl Environ Microbiol. 2019;85(23):e01746-19.
Yoshida CE, Kruczkiewicz P, Laing CR, Lingohr EJ, Gannon VPJ, Nash JHE, et al. The Salmonella in Silico typing resource (SISTR): an open web-accessible tool for rapidly typing and subtyping draft Salmonella genome assemblies. PLoS One. 2016;11(1):e0147101.
Tewolde R, Dallman T, Schaefer U, Sheppard CL, Ashton P, Pichon B, et al. MOST: a modified MLST typing tool based on short read sequencing. PeerJ. 2016;4:e2308.
Joensen KG, Tetzschner AMM, Iguchi A, Aarestrup FM, Scheutz F. Rapid and easy In Silico serotyping of Escherichia coli isolates by use of whole-genome sequencing data. J Clin Microbiol. 2015;53(8):2410–26.
Laing CR, Whiteside MD, Gannon VPJ. Pan-genome analyses of the species Salmonella enterica, and identification of genomic markers predictive for species, subspecies, and serovar. Front Microbiol. 2017;8:1345.
Zhang X, Payne M, Lan R. In silico identification of serovar-specific genes for Salmonella serotyping. Front Microbiol. 2019;10:835.
Zou Q-H, Li R-Q, Liu G-R, Liu S-L. Genotyping of Salmonella with lineage-specific genes: correlation with serotyping. Int J Infect Dis. 2016;49:134–40.
Yang L, Zhang X, Liu Y, Li H, Qiu S, Li P, et al. CSESA: an R package to predict Salmonella enterica serotype based on newly incorporated spacer pairs of CRISPR. BMC Bioinformatics. 2019;20(1):215.
Hendriksen R, Karlsmose Pederson S, Leekitcharoenphon P, Malorny B, Borowiak M, Battisti A, et al. Final report of ENGAGE - establishing next generation sequencing ability for genomic analysis in Europe. Annex D-list of online bioinformatics tools and software used for capacity building (status January 2018). EFSA Support Publ. 2018;EN-1431:58–78.
Yachison CA, Yoshida C, Robertson J, Nash JHE, Kruczkiewicz P, Taboada EN, et al. The validation and implications of using whole genome sequencing as a replacement for traditional serotyping for a national Salmonella reference laboratory. Front Microbiol. 2017;8:1044.
Uelze L, Borowiak M, Deneke C, Szabo I, Fischer J, Tausch SH, Malorny B. Comparative assessment of the performance and accuracy of four open-source tools for in silico serotyping of Salmonella spp. based on whole-genome short read sequencing data. Appl Environ Microbiol. 2019. https://0-doi-org.brum.beds.ac.uk/10.1128/AEM.02265-19.
Control ECfD, Authority EFS, Van Walle I, Guerra B, Cavalieri V, Borges V, et al. EFSA and ECDC technical report on the collection and analysis of whole genome sequencing data from food-borne pathogens and other relevant microorganisms isolated from human, animal, food, feed and food/feed environmental samples in the joint ECDC-EFSA molecular typing database. EFSA Support Publ. 2019;16(5):1337E.
Wattam AR, Davis JJ, Assaf R, Boisvert S, Brettin T, Bun C, et al. Improvements to PATRIC, the all-bacterial bioinformatics database and analysis resource center. Nucleic Acids Res. 2017;45(D1):D535–D42.
Jolley KA, Bray JE, Maiden MCJ. Open-access bacterial population genomics: BIGSdb software, the PubMLST.org website and their applications. Wellcome Open Res. 2018;3:124.
Larsen MV, Joensen KG, Zankari E, Ahrenfeldt J, Lukjancenko O, Kaas RS, et al. The CGE tool box. In: Deng X, den Bakker HC, Hendriksen RS, editors. Applied genomics of foodborne pathogens, food microbiology and food safety. Switzerland: Springer International Publishing; 2017. p. 65–90. https://0-doi-org.brum.beds.ac.uk/10.1007/978-3-319-43751-4_5.
Amid C, Pakseresht N, Silvester N, Jayathilaka S, Lund O, Dynovski LD, et al. The COMPARE data hubs. Database (Oxford). 2019;2019:baz136.
Llarena AK, Ribeiro-Gonçalves BF, Nuno Silva D, Halkilahti J, Machado MP, Da Silva MS, et al. INNUENDO: a cross-sectoral platform for the integration of genomics in the surveillance of food-borne pathogens. EFSA Support Publ. 2018;15(11):1498E.
Matthews TC, Bristow FR, Griffiths EJ, Petkau A, Adam J, Dooley D, et al. The Integrated Rapid Infectious Disease Analysis (IRIDA) platform. bioRxiv. 2018:381830. https://www.biorxiv.org/content/10.1101/381830v1.
Allard M, Wang C, Kastanis G, Pirone C, Muruvanda T, Strain E, et al., editors. Genometrakr: A pathogen database to build a global genomic network for pathogen traceback and outbreak detection. 2015 Annual Meeting; 2015.
Jünemann S, Sedlazeck FJ, Prior K, Albersmeier A, John U, Kalinowski J, et al. Updating benchtop sequencing performance comparison. Nat Biotechnol. 2013;31(4):294–6.
Silva M, Machado MP, Silva DN, Rossi M, Moran-Gilad J, Santos S, et al. chewBBACA: A complete suite for gene-by-gene schema creation and strain identification. Microb Genom. 2018;4(3):e000166.
Quainoo S, Coolen JPM, van Hijum S, Huynen MA, Melchers WJG, van Schaik W, et al. Whole-genome sequencing of bacterial pathogens: the future of nosocomial outbreak analysis. Clin Microbiol Rev. 2017;30(4):1015–63.
Mangul S, Martin LS, Hill BL, Lam AK, Distler MG, Zelikovsky A, et al. Systematic benchmarking of omics computational tools. Nat Commun. 2019;10(1):1393.
NCBI. Pathogen detection. Bethesda: U.S. National Library of Medicine/National Center for Biotechnology Information; 2019. https://0-www-ncbi-nlm-nih-gov.brum.beds.ac.uk/pathogens/
Ching T, Himmelstein DS, Beaulieu-Jones BK, Kalinin AA, Do BT, Way GP, et al. Opportunities and obstacles for deep learning in biology and medicine. J R Soc Interface. 2018;15(141):20170387.
Baker RE, Pena JM, Jayamohan J, Jerusalem A. Mechanistic models versus machine learning, a fight worth fighting for the biological community? Biol Lett. 2018;14(5):20170660.
Vilne B, Meistere I, Grantina-Ievina L, Kibilds J. Machine learning approaches for epidemiological investigations of food-borne disease outbreaks. Front Microbiol. 2019;10:1722.
This work was supported by the German Federal Institute for Risk Assessment, BfR (46–001 and 43–001). The BfR has received financial support from the Federal Government for Laura Uelze and Jens A. Hammerl on the basis of a resolution of the German Bundestag by the Federal Government and funded by the Ministry of Health within the framework of the project “Integrated genome-based surveillance of Salmonella (GenoSalmSurv; decision ZMVI1-2518FSB709 of 26/11/2018), and “Genome-based surveillance of transmissible colistin and carbapenem resistance genes in Gram-negative bacteria” (GÜCCI), respectively. Josephine Grützke was financially supported by the Ministry of Education and Research within the framework of the third-party funded project “Food safety and resilience of food chains in biological hazards” (Ess-B.A.R.), FKZ 13 N13982. Katharina Juraschek was financially supported by a grant of the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No. 773830 (JRP2- ARDIG – AMR2).
Ethics approval and consent to participate
Consent for publication
All authors declare that they have no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Uelze, L., Grützke, J., Borowiak, M. et al. Typing methods based on whole genome sequencing data. One Health Outlook 2, 3 (2020). https://0-doi-org.brum.beds.ac.uk/10.1186/s42522-020-0010-1
- Whole genome sequencing
- Bioinformatics tools